Canon VB-H710F Manual
59
S
et
ting P
age
5
General Upload
(1) [Upload]
Select [Upload Disabled], [HTTP Upload] or [FTP
Upload] for the upload method.
(2) [Video Format]
Select the [JPEG] or [H.264] format for video you want
to upload.
If [H.264] is selected, select [Use bit rate control]
under [Bit Rate Control] in [Video].
(3) [Frame Rate]
Enter the maximum frame rate of image to be
uploaded. This setting can only be made when
[JPEG] is selected for [Video Format].
(4) [Pre-event Buffer (number of frames)] / [Pre-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
Enter the number of frames or seconds of video to be
buffered before the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264] selection in [Video Format].
(5) [Post-event Buffer (number of frames)] / [Post-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
Enter the number of frames or seconds of video to be
buffered after the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264] selection in [Video Format].
Note
The server or network load may increase and the frame rate may
drop, depending on the settings. If this occurs, try the following
measures. Also check the settings including the network to the
server.
server.
• Reduce the image file size:
– Set a lower value under [Video Quality] for JPEG/H.264
(p. 55).
– Set a lower value for [Video Size: Upload / SD card] for
JPEG (p. 55).
– Set a lower value for [Video Size] for H.264 (p. 55).
– Set a lower value under [Target Bit Rate (kbps)] for H.264
– Set a lower value under [Target Bit Rate (kbps)] for H.264
(p. 55).
• Reduce the uploading frequency:
– Reduce the value in [Pre-event Buffer] or [Post-event Buffer]
[Upload]
Setting HTTP/FTP Upload and E-mail Notification
Setting HTTP/FTP Upload and E-mail Notification
The following can be set here.
• General Upload
Set the upload operation to be performed and the
image buffer.
• HTTP Upload
Set HTTP connection uploads.
• FTP Upload
Set FTP connection uploads.
• E-mail Notification
Set event information and image e-mail
notifications.
Important
• If the upload function is used, either the [Event] menu must
• If you are using both e-mail notification by text and image
and image upload by HTTP/FTP, set [Video Size: Upload / SD
card] (p. 55) to a small size.
• HTTP upload does not support SSL/TLS.
• If the camera is set to perform upload or e-mail notification
continuously, not all images or e-mails may be sent
depending on the video size and the network condition to the
depending on the video size and the network condition to the
server. In this case, an event log message is displayed
• If the destination for HTTP/FTP upload or e-mail notification is
set for a Windows operating system, IPsec communication
cannot be applied.
cannot be applied.
• When an H.264 video is uploaded, the following restrictions
apply to [H.264] of [Video].
- Only [Use bit rate control] can be selected for [Bit Rate
Control].
- Only [3072] or less can be selected for [Target Bit Rate
(kbps)].
- Only one of [0.5], [1], and [1.5] can be selected for [I
Frame Interval (sec)].
• The maximum image buffer size capacity is approx. 5 MB.
If a large video size is set, the Frame Rate, Pre-event Buffer
and Post-event Buffer may not be achieved as specified.
• If buffering cannot be achieved as specified, a message is
written to the event log (p. 79).
Before using a large video size, confirm that no messages
appear in the event log.
appear in the event log.
• Regardless of the image buffer frame rate setting, only a
single image will be uploaded when a timer event occurs