Canon imagePROGRAF iPF770 Manual
Loading Rolls in the Printer
Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
•
Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas
are dirty, we recommend cleaning them in advance.
are dirty, we recommend cleaning them in advance.
1
Press the Load button.
2
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.
Note
•
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.
3
Positioning your hands as shown, open the Roll Cover.
4
Holding the Roll Holder flange (a), rest the Roll Holder shaft on
the Roll Ledge (b).
At this time, position the holder so that the R label (c) on the
[W label (c) on the Roll Holder flange is aligned with the R la-
bel (d) on the printer .
the Roll Ledge (b).
At this time, position the holder so that the R label (c) on the
[W label (c) on the Roll Holder flange is aligned with the R la-
bel (d) on the printer .
a
d
c
b
b
iPF770
Loading Rolls in the Printer
Handling and Use of Paper
Handling rolls
357