Canon imagePROGRAF iPF770 Manual
Cause
Corrective Action
You are using paper that is
not compatible with automat-
ic cutting.
not compatible with automat-
ic cutting.
2.
Push the Release Lever back and remove the paper.
In other cases, the Cutter
Unit may be damaged.
Unit may be damaged.
Contact your Canon dealer for assistance.
End of paper feed.
End of paper feed.
Cause
Corrective Action
Although an attempt was made to advance the paper manually, it reached the limit posi-
tion that can be advanced.
tion that can be advanced.
Canceling manual advancing.
Rel lever is in wrong position.
Rel lever is in wrong position.
Cause
Corrective Action
The Release Lever is pushed back. Pull the Release Lever forward.
Turn off the printer and wait a while before restoring power.
Borderless printng not possible.
Borderless printng not possible.
Cause
Corrective Action
The print job received specifies a
type or width of paper that is not
compatible with borderless printing.
type or width of paper that is not
compatible with borderless printing.
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper Ref-
erence Guide.
For information on types of paper compatible with borderless printing, refer to the Paper Ref-
erence Guide.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
The document will be printed with a border.
The loaded paper is a size not com-
patible with borderless printing.
patible with borderless printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace the paper with paper compatible for borderless printing.
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Ref-
erence Guide.
For information on types of paper compatible with borderless printing, refer to the Paper Ref-
erence Guide.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
The document will be printed with a border.
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become narrow-
er or wider than the supported width
for borderless printing.
tracts depending on the environ-
ment of use, it may become narrow-
er or wider than the supported width
for borderless printing.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
tails on environmental conditions for various paper, see the Paper Reference Guide.
iPF770
End of paper feed.
Error Message
Messages regarding paper
617