Canon imagePROGRAF iPF770 Manual
Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead.
Cannot adjust printhead.
Cause
Corrective Action
The Printhead nozzles are clogged.
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
3.
Clean the Printhead if the nozzles are clogged.
4.
Execute Head Posi. Adj. again.
The Printhead cannot be aligned;
highly transparent film is loaded.
highly transparent film is loaded.
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
The Printhead is installed crooked.
Straighten the Printhead as follows, and then execute Head Posi. Adj. again.
1.
Press the OK button to clear the error.
2.
Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
3.
Execute Head Posi. Adj. again.
Wrong printhead.
Wrong printhead.
Cause
Corrective Action
An incompatible Printhead has been installed. Open the Top Cover and replace the Printhead with a new one.
Printhead error
Printhead error
Cause
Corrective Action
There is a problem with the Printhead. Open the Top Cover and replace the Printhead with a new one.
Cannot recognize print head.
Cannot recognize print head.
Cause
Corrective Action
No Printhead is installed.
Follow these steps to install the Printhead.
1.
Open the Top Cover.
2.
Install the Printhead.
The Printhead cannot be recognized because it is not installed correctly. Follow these steps to reinstall the Printhead.
Cannot adjust printhead.
iPF770
Error Message
Messages regarding printheads
622