Canon varioPRINT 135/120/110 Manual

NOTE

• It is not preferred to perform the manual media registration via the Settings Editor. The

manual media registration via the control panel is preferred because you can print the
verification chart immediately after you changed a setting.

• The media specific registration adjustment overwrites any automatic or manual media specific

registration performed previously.

Print the verification chart to verify the media registration.
1. Start the Settings Editor application.
2. Click [Media] to open the media catalog.
3. Select the media from the media catalog for which you want to perform the media

registration.

4. Click [Registration].

When you are not logged in, the login screen appears.

5. Enter the username and password to start the registration.
6. Select for which feed direction you to perform the media registration.
7. Enter the required values. The sections related to the manual media registration via the

you must enter. Only the [Corrections for preprinted media] are not available on the control
panel. These settings are described in this section.
For 1-sided media you simply have to correct the media registration of the front side.
Examples of 1-sided media are tab sheets and transparency media with paper backing. For 1-
sided media you cannot use the verification chart because the verification chart is 2-sided. To
perform the media registration you must use your own image to determine the required
values.
Possible settings, as displayed in the Settings Editor:
• Actual sheet size
• Registration front side

• Trapezoid
• Diamond
• Skew
• X elongation (0.01%)
• X offset
• Z offset

• Registration back side

• Trapezoid
• Diamond
• Skew
• X elongation (0.01%)
• X offset
• Z offset

• Corrections for preprinted media (see 

• [X image shift front ({0})]
• [X image shift back ({0})]
• [Z image shift front ({0})]
• [Z image shift back ({0})]

8. When the media registration is ready, the   icon appears behind the media registered.

Canon varioPRINT 135 Series