Canon imagePROGRAF iPF850 MFP M40 Manual

Handling sheets

Handling sheets

Follow these steps to load sheets in the printer.
The Stacker cannot be used for cut sheets. If the Stacker is installed on the printer, first remove the Stacker from
the printer. 

Important

Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.

Load the paper straight. Loading paper askew will cause an error.

If you are using cut sheets of length 860 mm (33.9 in) or more, the loaded cut sheets may touch the floor, caus-
ing soiling and scratching of the paper. If this happens, place a clean cloth or paper on the floor so that the cut
sheets do not touch the floor directly.

Note

Before loading sheets, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these
areas are dirty, we recommend cleaning them in advance. 

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.

Select sheets as the paper source.

If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on
the Display Screen.
Press ▲ or ▼ to select Load Paper, and then press the OK button.

If no print job was received

 

Press the Load button.

Press ▲ or ▼ to select Cut Sheet, and then press the OK button.

Note

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.

 

iPF850 Series

                                                                                                                                                                      

Loading Sheets in the Printer

                                                                                                                                                                                                                       

Handling Paper

Handling sheets

25