Canon imagePROGRAF iPF770 Manual

Handling sheets

Handling sheets

Follow these steps to load sheets in the printer.

Important

One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at a time.
This may cause paper jams.

Before feeding paper or printing, make sure the sheet is flat against the Roll Cover. The sheet may jam if it curls
before feeding or printing and the trailing edge drops toward the front.

Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.

Load the paper straight. Loading paper askew will cause an error.

Note

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.

Select sheets as the paper source.

If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on
the Display Screen. Go to the next step.

If no print job was received

 

Press the Load button.

Press ▲ or ▼ to select "Load Cut Sheet", and then press the OK button.

Note

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.

 

Loading Sheets in the Printer

                                                                                                                                                                  

iPF770 Series

                                                                                                                                                                                                                     

Handling Paper

Handling sheets

 

20