Canon imagePROGRAF iPF8400S Manual
Setting Item
Description, Instructions
System
Setup
Setup
Keep Paper Size
Rep.P.head Print
Choose On to have the printer automatically execute the
Advanced Adj. operations after you replace the Printhead.
Advanced Adj. operations after you replace the Printhead.
Nozzle Check
In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer ad-
just the timing for checks based on the frequency of nozzle
use. Choose 1 page to check once per page. Choose 10
pages to check once per 10 pages. Choose Off to not exe-
cute check.
If On is selected in Warning, a warning may be displayed
on the Control Panel depending on the result of the nozzle
check.
nozzle clogging. Choose Standard to have the printer ad-
just the timing for checks based on the frequency of nozzle
use. Choose 1 page to check once per page. Choose 10
pages to check once per 10 pages. Choose Off to not exe-
cute check.
If On is selected in Warning, a warning may be displayed
on the Control Panel depending on the result of the nozzle
check.
CarriageScanWdth
Specify the scan width of the carriage during printing. Select
Automatic for movement equivalent to the width of paper
loaded. Selecting Fixed will reduce any soiling on the back
of the paper, although printing may take a little longer.
Automatic for movement equivalent to the width of paper
loaded. Selecting Fixed will reduce any soiling on the back
of the paper, although printing may take a little longer.
Use RemoteUI
Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
only be configured from the control panel.
Reset PaprSetngs
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
figuration Tool to the default values.
Erase
HDD Da-
ta
HDD Da-
ta
High Speed
Erases file management data for print job data stored on
the printer's hard disk.
the printer's hard disk.
Secure High Spd.
Secure
Overwrites the entire hard disk with 00, FF, and random da-
ta (one time each). Verification is performed to check if the
data was correctly written.
ta (one time each). Verification is performed to check if the
data was correctly written.
Output
Method
Method
Print
Select the printing method for jobs received from software
other than the printer driver. When using the printer driver,
configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto Del)
will print the job and then delete the data from the printer's
hard disk. Selecting Save: Box 01 will only save the print
job in the box, without printing it.
other than the printer driver. When using the printer driver,
configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto Del)
will print the job and then delete the data from the printer's
hard disk. Selecting Save: Box 01 will only save the print
job in the box, without printing it.
Print (Auto Del)
Save: Box XX
Print After Recv
A setting for jobs received from software other than the
printer driver. When using the printer driver, configure set-
tings on the printer. Select On to print the job after it has
been saved.
printer driver. When using the printer driver, configure set-
tings on the printer. Select On to print the job after it has
been saved.
Common Box Set.
Select Print (Auto Del) to print without saving jobs in the
box shared among multiple users.
box shared among multiple users.
iPF8400S
Menu Settings
Control Panel
Printer Menu
645