Canon imagePRESS C7011VPS Manual

When images on the printed output are skewed or slightly rotated, perform a correction
procedure.

You are advised to use media with the maximum supported size for this correction. The
correction procedure changes the media attributes in the media catalog, so that the adjustments
are applied to all jobs that use the same media.

You can correct skewed and rotated images via the Trays view, System view, or via the media
used in a job. The procedure below describes the correction via the System view.

Ruler

1.

Touch [System] -> [Media].

2.

Select the media from the media catalog.

3.

Touch [Optimize] -> [Skew correction].

4.

Enter your maintenance PIN.

5.

Follow the instructions on the control panel.