Canon imagePRESS C7011VPS Manual

You can use the SADF to feed heavy or lightweight originals one by one, face down. Feeding
originals in a portrait position is referred to as long edge feed (LEF). Feeding originals in a
landscape position is referred to as short edge feed (SEF).

You can place the following originals into the SADF tray:
• Weight:

- 38 to 216 g/m²

• Size:

- A3, B4, A4, A4R, B5, B5R, or A5
(A5 originals cannot be placed horizontally. (A5R))

1.

Open the SADF tray.

2.

Adjust the slide guides to fit the size of your original.

3.

Place your original one sheet at a time, face down into the SADF tray, sliding it forward gently as
far as it will go.

IMPORTANT

• Make sure to place only one original at a time. If more than one original is placed at a time, a

paper jam may occur.

• If your original is curled, flatten it out as much as possible before placing it into the SADF tray.

NOTE

• Once scans are made from the originals, the originals are returned to the original output tray.
• When you need to make another scan, set the scan mode and place the original in the SADF

tray.