Canon imagePRESS C7011VPS Manual

When you carry out a copy job or scan job, you can use the Zoom function to reduce or enlarge
an image, for example:
• Copy an A4 / LTR original on an A3 / 11"x 17" sheet. The system enlarges the image
• Copy an A3 / 11"x 17" original on an A4 / LTR sheet. The system reduces the image
• Copy an A4 / LTR original with a small illustration on an A4 / LTR sheet, and at the same time

enlarge the illustration.

By factory default, the zoom function is set to Fit to page. This makes sure that no information is
lost. To change the zoom factor manually, touch the - and + buttons of the Zoom function in the
job window. If you use non-standard size originals, you must use the glass plate.

The zoom function for originals in the automatic document feeder is different from the zoom
function for originals on the glass plate.

Zoom behavior

Automatic document feeder

Center

Glass plate

Upper left-hand corner

This section describes the characteristics of the zoom function when you use the automatic
document feeder or the glass plate.

NOTE

The zoom function works identical for both copy jobs and scan jobs.

The following table shows the zoom behavior of the machine when the originals are scanned
from the automatic document feeder. The focus is on the centre of the original.

Scan from the automatic document feeder using the zoom function

The original is placed face up and in readable form into the auto-
matic document feeder.
The center of the original is a fixed point and is used as the origin
of the image.

Result of a scan with a 100% zoom factor.

Result of a scan with a 50% zoom factor.

NOTE

The center of the image is fixed.

4