Manualsbrain.com
  1. Manuals
  2. Brands
  3. Canon
  4. imageCLASS MF7470
  5. Manual

Canon imageCLASS MF7470 Manual

Download
Page of 484
1
2
3
4
5
6
7
8
9
10
11
4-37
Previous
Back
Next
TOP
Before Using the 
Machine
Original and Paper
Copying
Sending and 
Receiving
Printing and 
Scanning
Network (imageCLASS 
MF7480/MF7470 Only)
Remote UI (imageCLASS 
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
   Job  Recall
You can recall the last three destinations, scan settings, and 
send settings that have been set, and then send your 
documents.
The machine considers any one of the following operations a send job:
When settings, such as the destination, scan settings, and send 
settings, are specified, and the control panel power switch,   (Start), or 
 (Reset) is pressed
When the Auto Clear mode activates after the send settings are 
specified
The Standard mode is not stored in Recall memory.
The three most recent settings that were stored in memory are not 
erased even when the power is turned off.
1.
 Press   (SEND).
2.
  Place your originals.
3.
 Press 
[Recall].
4.
  Select [1 Before], [2 Before], or [3 Before], 
confirm the settings, then press [OK].
If there are more stored Send settings than are currently 
displayed, you can scroll through the list by pressing [
▼] or [▲].
You can change the settings for a recalled send job.
If there are multiple destinations stored in Recall memory, the 
order of the destinations shown in the list may not correspond to 
the order in which they were specified.
–
–
–
–
–
–
–
–
5.
 Press  (Start).
If the original is placed on the platen glass, follow the instructions 
that appear on the touch panel display, then press   (Start) once for 
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning 
is complete.