Canon imageCLASS MF7470 Manual

4-35

The Delayed Send mode enables you to store a send job in memory, 
and have it sent at a later time.

You can reserve up to 70 jobs for the Delayed Send. However, the actual 
number of jobs that can be reserved may be less than 70, depending on 
the following conditions:

If multiple documents are being sent at the same time
If large documents are being sent

The number of delayed send jobs could also be reduced if there are jobs 
other than Delayed Send, or it depends upon the other factors affecting 
the specified destinations.
Once the delayed documents are sent, the documents are automatically 
deleted from memory.
You can check the status or cancel the transmission of jobs for which a 
preset send time has been specified. (See “Using the System Monitor 
Screen,” on p. 4-75.)

For more information on specifying the destination, see “Specifying 
Destinations,” on p. 4-21.

■

–

–
–

–

–

–

Enter all four digits of the time (including zeros), using 24-hour 
notation.

Examples:

9:05 a.m. → 0905

4:18 p.m. → 1618

If you set a time earlier than the current time, the document will 
be sent at that time on the next day.
If you make a mistake when entering the send time, press 

 (Clear) to clear your entry, then enter another four-digit 

number.

If the original is placed on the platen glass, follow the instructions 
that appear on the touch panel display, then press   (Start) once for 
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning 
is complete.

To cancel a delayed send job, press [Send Settings], then 
[Delayed Send], then [Cancel].
To cancel all settings and return the machine to the Standard 
mode, press   (Reset).

–

–

–

–

–