Canon imageCLASS MF7470 Manual

Sending Documents

4‑56

The machine considers any one of the following operations a send job:

When settings, such as the destination, scan settings, and send settings, are specified, and the control panel 
power switch,   (Start), or   (Reset) is pressed
When the Auto Clear mode activates after the send settings are specified

The Standard mode is not stored in Recall memory.
The three most recent settings that were stored in memory are not erased even when the power is turned off.

–

–

–

–
–

① Select [1 Before], [2 Before], or [3 Before].

② Confirm the settings, then press [OK].

①

②

①

②

If there are more stored Send settings 
than are currently displayed, you can scroll 
through the list by pressing [

▼] or [▲].

You can change the settings for a recalled 
send job.
If there are multiple destinations stored 
in Recall memory, the order of the 
destinations shown in the list may not 
correspond to the order in which they were 
specified.

If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display, then press   (Start) once 
for each original. When scanning is complete, 
press [Done].
Scanning starts.
The scanned data is sent to the specified 
destination when scanning is complete.

–

–

–