Canon Océ VarioStream 7000 Manual
7.3.8 Replacing the fuser roller
318
A29246-X20-X-4-7680 / fa703.fm
4.
Tighten the three wing screws for
attach the fuser roller insert one after
the other step by step. Only use a max.
of three turns for each screw.
Proceed from one wing screw to the
next until the flange of the fuser roller
insert is secure against the side plate.
attach the fuser roller insert one after
the other step by step. Only use a max.
of three turns for each screw.
Proceed from one wing screw to the
next until the flange of the fuser roller
insert is secure against the side plate.
5.
Swivel on the waste collector and lock
with the pressure pin.
with the pressure pin.
6.
7.
Swivel on active filter unit by the
handle to the stop point.
handle to the stop point.
Proceed as follows:
3 of 4