Canon Océ VarioStream 7000 Manual

320

A29246-X20-X-4-7680 / fa703.fm

The following procedure is for replacing the pressure roller:

Caution
Observe the following safety directives when replacing the pressure roller:
The pressure roller may only be replaced by operators after training or instructions 
from service personnel.

1.

If the printing system has not yet stopped, click the following button:

2.

Select the  menu on the operator 
panel.

3.

Click on the following button to start pressure roller replacement:

Information on the icons displayed on the operator panel under "Worksteps":
see section  Icons, page 93

Note
Only if paper post-processing is connected:
Remove any deflection rollers that may be mounted on the stacker platform.

4.

Cut inserted paper in the paper input at a right angle to the transport direction and 
remove it from the printing system by continuously pressing the EJECT key.

5.

Lower the stacker top by pressing the right key under this icon 

.