Canon Océ VarioStream 7000 Manual
7.3.9 Replacing the pressure roller
322
A29246-X20-X-4-7680 / fa703.fm
10.
Swivel off the cover underneath the
fuser station.
fuser station.
11.
Press opening lever to the left and
carefully swivel down roller saddle.
carefully swivel down roller saddle.
Note
Allow the printing system to cool down in this state for approximately 30 minutes.
Allow the printing system to cool down in this state for approximately 30 minutes.
12.
Grasp pressure roller from below and
hold in the center.
Open the locking pins on the right and
left sides.
hold in the center.
Open the locking pins on the right and
left sides.
13. Carefully remove the pressure roller and place on paper surface.
Proceed as follows:
3 of 3