Canon Océ VarioPrint 6000+ Series Manual

Handle job errors

The required sup-
plies are not
available

Add the required supplies
(media, toner and staples)
before the machine stops
printing.

The dashboard helps you to determine when
the supplies are required.

The defined com-
bination of job
settings is not
possible

• The controller corrects

the settings.

• You must define a cor-

rect combination of job
settings in the [Proper-
ties] section of the
[Jobs] view on the con-
trol panel.

The solution depends on the place where the
job settings are defined.
• When the job settings are defined in an ap-

plication or printer driver, the controller au-
tomatically corrects the settings.

• When you define the job settings on the

control panel, the control panel displays a
message that the defined combination is not
possible. The [OK] button is disabled.

When you use media with a high amount of paper dust, you can have problems with toner
pollution of the prints right after the automatic black image cleaning procedure. Therefore it is
advised to enable the [Paper quality test] (see 

that the correct [Paper quality] setting is still at the right level for this new batch.

Toner pollution on the first sheets af-
ter the automatic black image clean-
ing procedure.

• Change the [Paper quality] setting from [Normal] to

[Low] (see 

• Use the [Paper quality test] to determine if this new

setting is the right cleaning mode for this media.

• The sheets of the 5

th

 set must be totally toner free, al-

so at the edges of the media size width.

• When these sheets still show toner pollution, you can

set the [Paper quality] setting to [Lower] (see 

).

• Use the [Paper quality test] to verify that this new set-

ting is the right cleaning mode for this media.

4