Canon Océ VarioPrint 6000+ Series Manual

Toner pollution on the first sheets
along the edge of the sheet (2-3 mm)
after the automatic black image
cleaning procedure.

• Change the [Paper quality] setting from [Normal] to

• Use the [Paper quality test] to determine if this new

setting is the right cleaning mode for this media.

• The sheets of the 5

th

 set must be totally toner free, al-

so at the edges of the media size width.

• When these sheets still show toner pollution, you can

set the [Paper quality] setting to [Lower] (see 

• Use the [Paper quality test] to verify that this new set-

ting is the right cleaning mode for this media.

NOTE

When the peripheral pollution mainly occurs at
1 side of the sheet, it is advised to rotate the
media in the paper tray by 180 degrees.

A combination of the above pollu-
tions.

• Change the [Paper quality] setting from [Normal] to

• Use the [Paper quality test] to determine if this new

setting is the right cleaning mode for this media.

• The sheets of the 5

th

 set must be totally toner free, al-

so at the edges of the media size width.

• When these sheets still show toner pollution, you can

set the [Paper quality] setting to [Lower] (see 

• Use the [Paper quality test] to verify that this new set-

ting is the right cleaning mode for this media.

Ghost images in mid and high toner
coverage areas.

• Change the [Paper quality] setting from [Normal] to

• If the print quality is still not optimal with respect to

mentioned ghost images, you can set the [Paper qual-
ity] setting to [Lower] (see 

).