Canon Océ VarioPrint 6000+ Series Manual

Fuse description: 7A, HRC Quick Acting, F

IMPORTANT

Turn OFF the machine and remove the mains power supply cable before you change the fuses.

This machine uses two fuses in parallel. To avoid the risk of fire, replace fuses using only the

same type and rating.

1.

Turn OFF the Booklet maker.

2.

Disconnect the Booklet maker from the power supply.

3.

Turn one fuse-holder to the left and remove the fuse-holder from the Booklet maker.

4.

Check the fuse.

5.

If the fuse is blown, then replace with a fuse of the correct specification.

6.

Repeat the procedure for the other fuse.

NOTE

If the fuse blows again, call your service engineer.