Canon Océ VarioPrint 6000+ Series Manual

• Flat blade screwdriver.

1

Lift the Booklet maker main deck.

See 

2

Remove the wire-holder from the
stitch head.

• Move the wire-holder retaining spring to

the right.

• Remove the wire-holder

If the wire-holder is held in position, use a
screwdriver to help remove the wire-holder
from the stitch head.

IMPORTANT

Attention: Do not apply force to
the wire guide bars or the pivot
block.

3

Inspect the area behind the wire-
holder for stitch-wire.

 

4

Remove any stitches or pieces of
stitch-wire and clean the area with
the air duster.

Use wire cutters to remove any jammed
stitches or pieces of stitch-wire.

5

Lubricate the stitch-head.

6

Fit the wire-holder.

Remember to put the wire-holder retaining
spring in position.

7

Close the Booklet maker.

8

Start the Booklet maker.

If the head operates normally and returns to
the parked position, then further action is
not needed.
If the stitch-head remains jammed, then re-
peat the procedure again.
If the problem continues, contact your serv-
ice engineer.