Canon Océ VarioPrint 6000+ Series Manual
Lubricate the Stitch Head
Introduction
Lubricate the stitch head:
• Every month, as part of the operator maintenance plan.
• When a new stitch-wire is installed if this interval is shorter.
• Every month, as part of the operator maintenance plan.
• When a new stitch-wire is installed if this interval is shorter.
Required tools
Klüber Isoflex NBU15 Grease, 50g
Air duster
IMPORTANT
Only use the grease shown in this manual. Correct lubrication extends the performance and
service life of the stitch head. Other types of grease do not protect the stitch head.
IMPORTANT
Only apply the grease as shown. If you apply additional grease, the paper will become stained.
Step
Action
Information
1
Trim the first 2.5 mm from the noz-
zle.
zle.
[51] Tip of the nozzle
[52] Trim the nozzle of the tube of grease
2
Remove the cap from the tube of
grease.
grease.
3
Fit the nozzle to the tube of grease.
4
On the user interface, touch
AD‐
VANCED > STITCHER UP > STITCH‐
ER UP
ER UP
The folder cover must be closed.
This action moves the stitch head to
the correct position for lubrication.
This action moves the stitch head to
the correct position for lubrication.
4
Lubricate the Stitch Head
118
Chapter 7 - Maintenance