Canon Océ VarioPrint 6000+ Series Manual

BRIDGE MOTOR STALL

Check for a paper jam in the
connecting bridge.
• Touch STOP   to stop the

Booklet maker.

• Clear the paper jam.
• Touch STOP   to clear the

message from the screen.

• Continue the print job.

See 

BRIDGE - No comms

Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON.
If the problem continues, then
call your service engineer.

 

CHECK PAPER SIZE

Remember to check the paper
size.
To make an accurate book you
must enter accurate paper di-
mensions into the touch
screen.
Measure the size of the prin-
ted paper. The paper dimen-
sion changes when the paper
is printed.

 

CHECK THE TRIM BIN

The trim bin is either open or
full. Check the trim bin. Empty
the trim bin if necessary.

 

COVER OPEN

A safety cover is open. The
machine will not operate until
the cover is closed.

 

DFA INTERFACE - No comms

Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.

 

DRIVE MOTOR STALL

There is a paper jam. Check
the machine and correct the
error.
Touch STOP   to clear the
message from the screen.

 

Endlay axis moving

The endlay axis (size adjust-
ment) is moving. This mes-
sage clears when the adjust-
ment is complete.
If the message does not clear,
touch 

 

4