Canon Océ VarioPrint 6000+ Series Manual

Fold blade axis moving

The fold blade axis (book
thickness adjustment) is mov-
ing. This message clears when
the adjustment is complete.
If the message does not clear,
touch 

 

FOLD BLADE NOT PARKED

Open the folder cover, remove
the paper, close the folder
cover. Touch START  , then
follow the instructions on the
screen.

 

FOLD - No comms

Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.

 

FORM CLAMP CLOSED

The form clamp is in the
wrong position. Touch START

 to reset the position. Follow

the instructions on the screen.

 

FORM ROLLER ERROR

Open the folder cover, remove
the paper, close the folder
cover.

See 

FORM ROLLER NOT PARKED

The form roller is in the wrong
position. Touch START   to
reset the position. Follow the
instructions on the screen.

 

FORM CLAMP ERROR

There is an error at the former.
Open the folder cover and re-
move the book. If necessary,
open the main deck to remove
the book.

See 

GATHERING AREA COVER
OPEN

Close the gathering area cover
if you need to operate the ma-
chine online.

 

INVERTER ERROR

Check for a paper jam and
clear if necessary.
Touch STOP   to clear the
message from the screen. If
the problem continues, con-
tact your service engineer.

 

JAM AT BRIDGE INFEED

There is a paper jam at the in-
feed to the connecting bridge.
Clear the jam and continue.

See 

JAM AT FORM ROLLER

Open the folder cover, remove
the paper, close the folder
cover.

See 

4