Canon Océ VarioPrint 6000+ Series Manual
Problem
Cause
Solution
JAM AT STACKER INFEED
There is a jam in the stacker
infeed. Remove the books
from the stacker infeed. Press
the reset button on the stack-
er.
infeed. Remove the books
from the stacker infeed. Press
the reset button on the stack-
er.
See
JAM AT STACKER OUTFEED
There is a jam in the stacker
outfeed or there are paper
trimmings in the stacker out-
feed. Remove the books from
the stacker outfeed. Check for
paper trimmings and remove
them if present. Press the re-
set button on the stacker.
outfeed or there are paper
trimmings in the stacker out-
feed. Remove the books from
the stacker outfeed. Check for
paper trimmings and remove
them if present. Press the re-
set button on the stacker.
See
JAM BEFORE TRIMMER
There is a book jammed be-
fore the trimmer. Open the
main deck to remove the
book.
fore the trimmer. Open the
main deck to remove the
book.
See
JAM IN CONNECTING BRIDGE There is a paper jam in the
connecting bridge. Clear the
jam and continue.
jam and continue.
See
JAM IN GATHERING AREA
There is a paper jam in the
gathering area. Open the con-
necting bridge cover, lift the
connecting bridge and remove
the paper jam.
gathering area. Open the con-
necting bridge cover, lift the
connecting bridge and remove
the paper jam.
See
JAM IN STACKER AREA
There is a paper jam at the
outfeed of the machine. Re-
move the jammed books and
continue.
outfeed of the machine. Re-
move the jammed books and
continue.
JAM IN STITCHER AREA
There is a paper jam in the
stitch area. Open the folder
cover, remove the paper jam
and continue.
stitch area. Open the folder
cover, remove the paper jam
and continue.
See
JAM IN STITCH HEAD
There is a jam in the stitch
head.
head.
See
JAM IN TRIMMER
There is a book jammed in the
trimmer. Clear the jam and
continue.
trimmer. Clear the jam and
continue.
See
MAIN CONTROL - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
4
Error Messages
80
Chapter 6 - Error Conditions, Problems and Solutions