Canon Océ VarioPrint 6000+ Series Manual

Stitch axis moving

The stitch axis is moving. This
message clears when the ad-
justment is complete.
If the message does not clear,
touch 

ADVANCED > RE REF.

 

Stitch length will change soon The stitch length cannot adjust

at the moment. The stitch leg
length will adjust after the
next book.

 

STITCH - No comms

Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.

 

Stitch position adjusting

The stitch position is adjust-
ing. This message clears when
the adjustment is complete.
If the message does not clear,
touch 

ADVANCED > RE REF.

 

STITCH TIMEOUT

Press STOP  . Open the folder
cover, remove the paper, close
the folder cover.

 

SYSTEM ERROR
00.20
40.21
40.22

Touch STOP to clear the mes-
sage from the screen. If the
message is not cleared, use
the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.

 

SYSTEM ERROR 39.xx

Press the reset button on the
stacker. If the message is not
cleared, use the stacker mains
ON/OFF switch. Turn the
stacker OFF, then turn the
stacker ON. If the problem
continues, then call your serv-
ice engineer.

 

TOO MANY PAGES

The printer has delivered too
many sheets into the gather-
ing area. Remove the incorrect
set. Correct the printer setting.
Touch STOP   to clear the
message from the screen.
Check the settings for 

THICKNESS or SHEET THICK‐
NESS.

See 

4