Canon Océ VarioPrint 6000+ Series Manual

TOUCH PAD ERROR

There is a fault with the
START and STOP touch pads.
If the problem continues, then
call your service engineer.

 

Touch START to clear ma-
chine

There may be some paper in
the machine. Touch START 
to clear the machine before
you start a new job.

 

Trim axis moving

The trim axis (size adjustment)
is moving. This message
clears when the adjustment is
complete.
If the message does not clear,
touch 

ADVANCED > RE REF.

 

TRIM BIN OPEN

The trim bin is not fitted or is
not contacting the safety
switch. Fit the trim bin.

 

TRIM BLADE NOT PARKED

The trim blade is in the wrong
position. Touch START   to
reset the position.
Follow the instructions on the
screen.

 

TRIM - No comms

Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.

 

USER STOP

The user has touched the
STOP   button while the ma-
chine is in operation. Touch
START   to restart the ma-
chine.