Olympus XZ-10 Instruction Manual

EN

Connect the USB cable and USB-AC adapter to the camera and charge the battery.

•  The battery is not fully charged at shipment. Before use, be sure to charge the battery 

until the indicator lamp turns off (up to 3 hours).

AC outlet

Multi-
connector

USB cable

(supplied)

Indicator lamp
On: Charging
Off: Charged

ON/OFF button

Charge the battery when 
the error message shown 
below appears.

Error message

Flashes in red

•  The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs 

depending on the region where you purchased the camera. If you received a plug-in type 
USB-AC adapter, plug it directly into AC outlet.

•  The included USB-AC adapter has been designed to be used for charging and playback. 

Do not take pictures while the AC adapter is connected to the camera.

•  Be sure to unplug the power plug of the USB-AC adapter from the wall outlet when the 

charging is complete or the playback ends.

•  For details on the battery, see “Battery Handling Precautions” (P. 82). For details on the 

USB-AC adapter, see “USB-AC adapter” (P. 83).

•  If the indicator lamp does not light, check the USB cable and USB-AC adapter 

connections.

•  The battery can be charged while the camera is connected to the computer via USB. 

The charging time varies depending on the performance of the computer. (There may be 
cases in which it takes approx. 10 hours.)