Olympus c-211 zoom Introduction Manual

The card in the camera is protected by a write-protect seal.

➔

If you’re absolutely sure you wish to write to this card, remove (and discard) the
seal (p.32). Otherwise use a different card.

No card in camera.

➔

Insert a card. (p.32)

The camera isn’t in RECORD mode.

➔

Turn the mode dial to 

. (p.42)

The scene has enough light without the flash.

➔

If you wish to force the flash regardless of ambient light conditions, set the flash
mode to “fill-in.” (p.87)

The camera is set for sequence shooting or panorama shooting.

➔

The flash is automatically disabled when you are shooting sequences or
panoramas. (pp.119, 131)

The flash mode is set to “off.”

➔

Change to a different flash mode. (p.84)

The camera is still in RECORD mode.

➔

Set the mode dial to PLAY mode (

).

The card is empty.

➔

The monitor displays the “NO PICTURES” message to let you know that the card is
empty (p.62). Take some pictures, then try again.

There’s a problem with the card.

➔

Refer to “Error Messages” on page 200 for more information.

The camera is connected to a TV.

➔

The monitor does not operate if a video cable is connected to the video output jack.
(p.70)