Olympus E-5 Introduction Manual

112

EN

You can set the shooting mode in which the ISO [AUTO] setting is activated.

[P/A/S]

The [AUTO] setting is activated in all shooting modes except M and 

BULB mode. 

When [AUTO] is selected in M mode, ISO 200 is set.

The [AUTO] setting is activated for other than 

BULB mode. The ISO is automatically 

selected to obtain the optimal ISO even in M mode.

You can select the maximum time (in minutes) for bulb shooting.

ANTI-SHOCK z

You can select the interval between fully pressing the shutter button and releasing the shutter 
to be anywhere from 1/8 to 30 seconds.
This diminishes camera shake caused by vibrations. This feature is useful in situations such 
as microscope photography and astrophotography.  

x

Anti-shock is added to the shooting functions individually (single-frame shooting, sequential 
shooting, self-timer shooting and remote control shooting). 

g“Sequential shooting” (P. 59)

W 

# CUSTOM

#X-SYNC.

You can set the shutter speed that will be used when the flash fires. The speed can be set 
from 1/60 to 1/250 in 1/3 EV increments.

#SLOW LIMIT

You can set the slow limit of the shutter speed that will be used when the flash fires. The 
speed can be set from 30 to 1/250 in 1/3 EV increments.
• When [AUTO] or [REDEYE] is set, the synchronous speed is limited to 1/30 second even 

when the slow limit is set to slower than 1/30 second.

w+F

When set to [ON], it will be added to the exposure compensation value and flash intensity 
control will be performed.

s0033_e_00_0_unified.book  112 ページ  ２０１０年１１月１６日　火曜日　午後５時２４分