Olympus E-5 Introduction Manual

113

EN

X K/ASPECT/COLOR/WB

This function reduces the noise that is generated during long exposures. When shooting 
night scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE 
REDUCT.], you can let the camera reduce noise automatically to produce clearer images.
When set to [AUTO], noise reduction will be activated only when the shutter speed is slow. 
When set to [ON], noise reduction will always be activated.

• While noise reduction is activated, it takes about twice the usual time to take a picture.
• The noise-reduction process is activated after shooting.
• During processing the card access lamp blinks. You cannot take more pictures until the 

card access lamp turns off.

x

• During sequential shooting, [NOISE REDUCT.] is [OFF] automatically.
• This function may not work effectively with some shooting conditions or subjects.

You can select the noise processing level. Use [STANDARD] for general use. [HIGH] is 
recommended during high sensitivity shooting (High ISO).

gP. 66

Select the white balance to suit the light source. Other than custom white balance [CWB], 
adjust in the A direction (red - blue) and G direction (green - reddish purple) within the range 
[+7] to [-7].

ALL >

You can apply the same compensation value to all the white balance modes at once.

The same compensation value applies to all WB modes.

[ALL RESET] The WB compensation value settings applied to each WB mode are all 

cleared at once.

If you select [ALL SET]
1) Use 

bd to select the color direction.

Toward A: Amber-Blue/Toward G: Green-Magenta

2) Use 

ac to set the compensation value. g“WB compensation” (P. 68)

Releasing the 

AEL/AFL button takes a sample image. You can check the white balance 

you have adjusted.

If you select [ALL RESET]
1) Use 

ac to select [YES].

When set to [OFF]

When set to 
[ON] or [AUTO]

s0033_e_00_0_unified.book  113 ページ  ２０１０年１１月１６日　火曜日　午後５時２４分