Olympus PEN-F Introduction Manual

EN

 T Release/j/Image Stabilizer

g

If [On] is selected, the shutter can be released even when 
the camera is not in focus. This option can be set separately 
for S-AF (P. 52) and C-AF (P. 52) modes.

—

j L fps 

Choose the frame advance rates for [

S], [T] , [k] and 

[

l]. Figures are the approximate maximums.

56, 57

j H fps 
♥j L fps
♥j H fps
Image Stabilizer

Activates image stabilization for still image shooting and 
movie recording respectively.

55

j Image 
Stabilization 

Activates/deactivates image stabilization for continuous 
shooting.

—

When set to [Off], the IS (Image Stabilization) function while 
the shutter button is pressed halfway will not be activated.

—

If [On] is selected, priority is given to the lens function operation 
when using a lens with an image stabilization function.
•  This option has no effect on lenses that are equipped with 

an image stabilization switch.

—

 Release Lag-Time  If [Short] is selected, the time lag between fully pressing the 

shutter button and the shot being taken can be shortened.
•  This will shorten the battery life. Also make sure that 

the camera is not subject to sharp impacts while in use. 
Such impacts may cause the monitor to stop displaying 
subjects. If this happens, turn the power off and on again.

—

 U Disp/

8/PC

g

[HDMI Out]: Selecting the digital video signal format for 
connecting to a TV via an HDMI cable.
[HDMI Control]: Select [On] to allow the camera to be 
operated using remotes for TVs that support HDMI control. 
This option takes effect when pictures are displayed on a TV.

121

Choose the video standard ([NTSC] or [PAL]) used in your 
country or region.

121

 c 

T

 c 

U