Olympus WS-801 Introduction Manual

Po
we
r s

Insert the battery, observing the

= and - polarities.

Close the battery cover completely

by pressing down at

A , then

sliding the cover towards

B .

Power supply

Inserting the battery

This recorder can be used with either a
Ni-MH rechargeable battery or AAA alkaline
battery.

• When charging the recorder, make

sure that the supplied Ni-MH
rechargeable battery (BR404) is in
place.

• The supplied rechargeable battery

is not fully charged. Before using
the recorder or after long periods of
disuse, it is recommended that you
continuously charge the battery until
full (

☞ P.16).

For WS-803, WS-802:

This recorder cannot charge the
rechargeable battery.

For WS-801:

Lightly press down on the arrow

and slide the battery cover open.

Notes

• A manganese battery cannot be used in

this recorder.

• When the battery is changed, a AAA

alkaline battery or Olympus Ni-MH
rechargeable battery is recommended.

• Be sure to stop the recorder before

replacing the battery. Unloading the
battery while the recorder is in use may
cause a malfunction resulting in the
corruption of the file, etc. If you take out
the battery during recording, you will
lose your currently recorded file because
the file header will not be able to close.