Olympus WS-801 Introduction Manual

Page of 95
15
1
EN
Po
we
r s
u
p
p
ly
Power supply
 Battery  indicator 
 • 
When  [
] appears on the display, 
charge or replace the battery as soon 
as possible. When the battery has 
insufficient power to operate the 
recorder, [
] and [  Battery  low  ] 
appear on the display and the 
recorder shuts down. 
 Battery  settings 
 Select the battery type to match the battery 
you are using. 
    
1
   Replace the battery and turn on 
the recorder ( 
  P.14, P.19). 
    
2
   Press the + or − button to change 
the setting. 
 [  Ni-MH  ]  (
): 
  
Select when using the Olympus 
Ni-MH rechargeable battery (BR404). 
 [  Alkaline  ]  (
): 
  
Select when using an alkaline battery. 
    
3
   Press the  
`  OK  button to 
complete the setting. 
 •  If the “ Hour ” indicator flashes in the 
display, see “ Setting the time and 
date [ Time & Date ]
 ”  ( 
☞  P.21). 
 The battery indicator on the display 
changes as the battery loses power. 
 Battery  type 
  
Note 
 •  When a voice/music file is played, 
depending on the volume level the 
recorder may be reset due to a drop in 
the voltage output of the battery even if 
[
] is displayed in the battery indicator. 
In this case, lower the volume of the 
recorder. 
 •  If it takes longer than 15 minutes to 
replace the dead battery or if you take 
the battery in and out repeatedly at short 
intervals, you may have to re-enter the 
battery and time settings. In this case, 
 Battery  ] screen will appear. For more 
details, see “  Battery  settings  ”. 
 •  Remove the battery if you are not going 
to use the recorder for an extended 
period of time. 
 •  When replacing the rechargeable battery, 
be sure to use a Ni-MH rechargeable 
battery (optional). The use of other 
manufacturers’ products can damage the 
recorder and should be avoided.