Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 Software Guide
Management Commands
155
M4200 and M4300 Series ProSAFE Managed Switches
key (TACACS Config)
Use the key command in TACACS Configuration mode to specify the authentication and
encryption key for all TACACS communications between the device and the TACACS server.
This key must match the key used on the TACACS daemon. The key-string argument
specifies the key name. For an empty string use “ ”. (Range: 0 - 128 characters).
encryption key for all TACACS communications between the device and the TACACS server.
This key must match the key used on the TACACS daemon. The key-string argument
specifies the key name. For an empty string use “ ”. (Range: 0 - 128 characters).
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the output of the show running-config command (for information about the
command, see
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the output of the show running-config command (for information about the
command, see
encrypted format. You cannot show these keys in plain text format.
keystring (TACACS Config)
Use the keystring command in TACACS Server Configuration mode to set the TACACS+
server-specific authentication encryption key used for all TACACS+ communications
between the TACACS+ server and the client.
server-specific authentication encryption key used for all TACACS+ communications
between the TACACS+ server and the client.
Command example:
(NETGEAR Switch)(Config)#tacacs-server host 1.1.1.1
(NETGEAR Switch)(Tacacs)#keystring
Enter tacacs key:********
Re-enter tacacs key:********
port (TACACS Config)
Use the port command in TACACS Configuration mode to specify a server port number.
The server port-number argument is a number in the range 0–65535.
The server port-number argument is a number in the range 0–65535.
Format
key
[key-string | encrypted key-string]
Mode
TACACS Config
Format
keystring
Mode
TACACS Server Config
Default
49
Format
port
port-number
Mode
TACACS Config