Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 Software Guide
Utility Commands
207
M4200 and M4300 Series ProSAFE Managed Switches
Command example:
(NETGEAR Switch) #show process proc-list
Process Application VM Size VM Peak
PID Name ID-Name Chld (KB) (KB) FD Count
---- ---------------- -------------------- ---- -------- -------- --------
15260 procmgr 0-procmgr No 1984 1984 8
15309 dataplane 1-dataplane No 293556 293560 11
15310 switchdrvr 2-switchdrvr No 177220 177408 57
15314 syncdb 3-syncdb No 2060 2080 8
18718 lighttpd 4-lighttpd No 5508 5644 11
18720 lua_magnet 4-lighttpd Yes 12112 12112 7
18721 lua_magnet 4-lighttpd Yes 25704 25708 7
show running-config
Use this command to display or capture the current setting of different protocol packages
supported on the switch. This command displays or captures commands with settings and
configurations that differ from the default value. To display or capture the commands with
settings and configurations that are equal to the default value, include the all option.
supported on the switch. This command displays or captures commands with settings and
configurations that differ from the default value. To display or capture the commands with
settings and configurations that are equal to the default value, include the all option.
Note:
The show running-config command does not display the User
Password, even if you set one different from the default.
Password, even if you set one different from the default.
The output is displayed in script format, which can be used to configure another switch with
the same configuration. If the optional scriptname is provided with a file name extension of
.scr
the same configuration. If the optional scriptname is provided with a file name extension of
.scr
, the output is redirected to a script file.
Note:
If you issue the show running-config
command from a serial
connection, access to the switch through remote connections (such as
Telnet) is suspended while the output is being generated and displayed.
Telnet) is suspended while the output is being generated and displayed.
Application
ID-Name
The application identifier and its associated name.
Child
Indicates whether the process has spawned a child process.
VM Size
Virtual memory size.
VM Peak
The maximum amount of virtual memory the process has used at a given time.
FD Count
The file descriptors count for the process.
Parameter
Description