Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 Software Guide

The following information is displayed for the command. 

(NETGEAR Switch) #show running-config interface 0/1

!Current Configuration:

!

interface  0/1

addport 3/1

exit

(NETGEAR Switch) #

This command displays the content of text-based configuration files from the CLI. The 
text-based configuration files (startup-config, backup-config and factory-defaults) are saved 
compressed in flash. With this command, the files are decompressed while displaying their 
content.

interface 

Running configuration for the specified interface.

lag-intf-num 

Running configuration for the LAG interface.

loopback-id

Running configuration for the loopback interface.

tunnel-id

Running configuration for the tunnel interface.

vlan-id

Running configuration for the VLAN routing interface.

unit|slot|port

Enter an interface in unit/slot/port format.

lag

Display the running config for a specified lag interface.

loopback

Display the running config for a specified loopback interface.

tunnel

Display the running config for a specified tunnel interface.

vlan

Display the running config for a specified vlan routing interface.

Format

show {startup-config | backup-config | factory-defaults}

Mode

Privileged EXEC 

startup-config

Display the content of the startup-config file.