Netgear WC7520 - ProSafe 20-AP Wireless Controller Reference Manual
Configuring Network Settings
64
ProSafe 20-AP Wireless Controller WC7520
2.
Configure the settings as explained in the following table:
3.
Click Apply to save your settings.
Time Management
This screen lets you configure the time-related settings of your wireless controller and
managed access points.
managed access points.
To configure time settings:
1.
Select Configuration > System > Time. The Time Settings screen displays:
Figure 28.
Table 8. General settings
Setting
Description
Name
Enter a unique value as the wireless controller name. NETGEAR recommends
changing the name as soon as possible after setting up. The name needs to contain
only alphabetical characters, numbers, and hyphens, and needs to be 31 characters or
less.
changing the name as soon as possible after setting up. The name needs to contain
only alphabetical characters, numbers, and hyphens, and needs to be 31 characters or
less.
Country/Region
From the drop-down list, select the region of operation for the wireless controller and
the access points managed by the wireless controller. This setting is crucial for optimal
performance of the wireless controller. The wireless controller uses the country code to
determine the best wireless settings for your access points. In the United States, the
country is preset and cannot be changed on the access points. If the country or region
is not set up correctly, the wireless controller might not be able to access the access
points.
the access points managed by the wireless controller. This setting is crucial for optimal
performance of the wireless controller. The wireless controller uses the country code to
determine the best wireless settings for your access points. In the United States, the
country is preset and cannot be changed on the access points. If the country or region
is not set up correctly, the wireless controller might not be able to access the access
points.
Controller
Location Code
Location Code
Optionally, enter a code to identify the physical location of the wireless controller. This
is especially useful if you use more than one wireless controller.
is especially useful if you use more than one wireless controller.