Netgear WC7600v2 – ProSAFE Wireless Controller User Manual

For each individual access point, you can change the general information, IP settings, and 
VLAN settings, you can switch between the internal and external antenna (if the access point 
supports an external antenna), and you can enter location information.

For a WAC740 access point that is on the managed list, you can also enable link aggregation 
by using the following procedure. Link aggregation is required if you want to set up a link 
aggregation group (LAG) connection between the WAC740 access point and a switch.

For more information about setting up a LAG connection for a WAC740 access point, see 

Do not confuse link aggregation for a WAC740 access point with link 
aggregation for a WC7600v1 or WC9500 wireless controller (see 

configuration between the WC7600v1 or WC9500 wireless controller 
and a switch or router.



Open a web browser, and in the browser’s address field, type the wireless controller’s IP 
address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login window opens.

Click the Login button.

The wireless controller’s web management interface opens and displays the Summary 
page.

Select Access Point > Managed AP List.

The Managed AP List page displays.

Select the access point that you want to change by selecting its radio button in the Edit 
column of the Managed AP List.

Click the Edit button.