Netgear WC7600v1 - ProSAFE Wireless Controller User Manual

After the access points are added to the Managed AP List, the wireless controller 

upgrades the firmware of the access points to the latest firmware that is loaded on the 
wireless controller, and the access points become managed access points. Depending 
on the number of access points that you add to the Managed AP List, this process might 
take several minutes.

By default, the access point upgrade process uses multicast. If you must configure a 
specific multicast IP address range for the upgrade process or disable multicast, see 

If one or more access points do not transition to the Connected state (see the Status 
column in the Managed AP List), see 

For information about how to manage the Managed AP List, see 

After you add discovered access points to the Managed AP List, you can view the status of 

the access points on the list, change information for selected access point on the list, and 
remove access points from the list.

The managed AP List displays the status, IP addresses, MAC addresses, model numbers, 
names, and other information for the managed access points.



Open a web browser, and in the browser’s address field, type the wireless controller’s IP 
address.

By default, the IP address is 192.168.0.250.