Manualsbrain.com
  1. Manuals
  2. Brands
  3. Netgear
  4. STM300 ProSecure Web and Email Threat Management Appliance
  5. Reference Manual

Netgear STM300 ProSecure Web and Email Threat Management Appliance Reference Manual

Download
Page of 261
28
   
|   
Chapter 2.  Using the Setup Wizard to Provision the STM in Your Network  
ProSecure Web/Email Security Threat Management (STM) Appliance
4. 
Verify the installation. See 
5. 
Register the STM. See 
Each of these tasks is described separately in this chapter.
Qualified Web Browsers
To configure the STM, you need to use a Web browser such as Microsoft Internet Explorer 
5.1 or later, Mozilla Firefox l.x or later, or Apple Safari 1.2 or later with JavaScript, cookies, 
and SSL enabled.
Although these Web browsers are qualified for use with the STM’s Web Management 
Interface, SSL VPN users should choose a browser that supports JavaScript, Java, cookies, 
SSL, and ActiveX to take advantage of the full suite of applications. Note that Java is required 
only for the SSL VPN portal, not for the Web Management Interface.
Logging In to the STM
To connect to the STM, your computer needs to be configured to obtain an IP address 
automatically from the STM via DHCP. For instructions on how to configure your computer for 
DHCP, see the document that you can access from 
To connect and log in to the STM:
1. 
Start any of the qualified browsers, as explained in 
page.
2. 
Enter https://192.168.1.201 in the address field. 
Figure 14.  
Note:  
The STM factory default IP address is 192.168.1.201. If you change 
the IP address, you need to use the IP address that you assigned to 
the STM to log in to the STM.
The NETGEAR Configuration Manager Login screen displays in the browser (see the 
following figure, which shows the STM300).
https://192.168.1.201