Netgear FVS318v1 – Prosafe Wireless N VPN Firewall Reference Manual
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
2-6
Introduction
M-10146-01
These LEDs are green when lit, except for the TEST LED, which is amber.
The Firewall’s Rear Panel
The rear panel of the FVS318 (
) contains the connections identified below.
Figure 2-2: FVS318 Rear Panel
Viewed from right to left, the rear panel contains the following elements:
•
Ground connector.
•
Factory Default Reset push button.
•
Eight Local Ethernet RJ-45 ports for connecting the firewall to the local computers.
•
Internet WAN Ethernet RJ-45 port for connecting the firewall to a cable or DSL modem.
•
AC power adapter input.
•
Power switch.
Table 2-1:
LED Descriptions
Label
Activity
Description
POWER
On
Power is supplied to the firewall.
TEST
On
Off
Off
The system is initializing.
The system is ready and running.
The system is ready and running.
INTERNET and LOCAl
100
On/Blinking
The port is operating at 100 Mbps.
LINK/ACT
(Link/Activity)
On/Blinking
The port has detected a link with a connection and is operating at
10 Mbps. Blinking indicates data transmission.
10 Mbps. Blinking indicates data transmission.