Netgear UTM150 – ProSECURE Unified Threat Management (UTM) Appliance User Manual
Advanced Settings
64
NETGEAR ProSAFE VPN Client
The Certificate Export Wizard opens. This wizard enables you to export the certificate to a
file.
file.
9.
Click the OK button.
The View Certificate page closes.
Use Certificates from USB Tokens and Smart Cards
The VPN Client can read certificates from USB tokens and smart cards. Smart cards can
contain X509 certificates that can be protected by a PIN code.
contain X509 certificates that can be protected by a PIN code.
To configure a tunnel with a certificate from a USB token or smart card:
1.
Insert a USB token or smart card into the computer.
2.
If requested as part of USB token or smart card reader identification process, enter the PIN
code.
code.
Note:
If the PIN code is incorrect, the VPN Client displays a message that the
USB token or smart card will be locked out after three consecutive
attempts with an incorrect PIN code.
USB token or smart card will be locked out after three consecutive
attempts with an incorrect PIN code.
3.
Click the OK button.
4.
On your desktop, double-click the VPN Client shortcut
.
The VPN Configuration page displays.
5.
In the VPN Tunnel Tree pane, click the IPSec configuration name of the tunnel.
The Authentication page displays.
6.
Click the Certificates tab.
The certificates from the USB token or smart card are automatically imported and display
in the certificates list.
in the certificates list.
7.
Select a certificate by selecting its radio button.