Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet

This command disables multicast storm recovery mode for an interface.

no storm-control multicast

This command configures the multicast storm recovery threshold for an interface as a 
percentage of link speed and enables multicast storm recovery mode. If the mode is enabled, 
multicast storm recovery is active, and if the rate of L2 multicast traffic ingressing on an 
interface increases beyond the configured threshold, the traffic will be dropped. Therefore, 
the rate of multicast traffic will be limited to the configured threshold.

storm-control multicast level <0-100>

This command sets the multicast storm recovery threshold to the default value for an 
interface and disables multicast storm recovery.

no storm-control multicast level <0-100>

Use this command to configure the multicast storm recovery threshold for an interface in 
packets per second. If the mode is enabled, multicast storm recovery is active, and if the rate 
of L2 broadcast traffic ingressing on an interface increases beyond the configured threshold, 
the traffic is dropped. Therefore, the rate of multicast traffic is limited to the configured 
threshold.

storm-control multicast rate <0-14880000>

storm-control multicast

Interface Config

Interface Config

5

Interface Config

Interface Config

0

Interface Config