Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet
Routing Commands
305
ProSafe Managed Switch
ip icmp echo-reply
Use this command to enable the generation of ICMP Echo Reply messages by the router. By
default, the generation of ICMP Echo Reply messages is enabled.
default, the generation of ICMP Echo Reply messages is enabled.
Default
Format
ip icmp echo-reply
Mode
no ip icmp echo-reply
Use this command to prevent the generation of ICMP Echo Reply messages by the router.
Format
no ip icmp echo-reply
Mode
ip icmp error-interval
Use this command to limit the rate at which IPv4 ICMP error messages are sent. The rate
limit is configured as a token bucket, with two configurable parameters, burst-size and
burst-interval.
limit is configured as a token bucket, with two configurable parameters, burst-size and
burst-interval.
The burst-interval specifies how often the token bucket is initialized with burst-size tokens.
burst-interval is from 0 to 2147483647 milliseconds (msec).
burst-interval is from 0 to 2147483647 milliseconds (msec).
The burst-size is the number of ICMP error messages that can be sent during one
burst-interval. The range is from 1 to 200 messages.
burst-interval. The range is from 1 to 200 messages.
To disable ICMP rate limiting, set burst-interval to zero (0).
Default
• burst-interval of 1000 msec.
• burst-size of 100 messages
Format
ip icmp error-interval <
burst-interval> [<burst-size>]
Mode
no ip icmp error-interval
Use the no form of the command to return burst-interval and burst-size to their default
values.
values.
Format
no ip icmp error-interval
Mode
enabled
Global Config
Global Config
Global Config
Global Config