Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet
IP Multicast Commands
307
ProSafe Managed Switch
ip mcast boundary
This command adds an administrative scope multicast boundary specified by
<groupipaddr>
<groupipaddr>
and <mask> for which this multicast administrative boundary is applicable.
<groupipaddr>
is a group IP address and <mask> is a group IP mask.
Format
Mode
no ip mcast boundary
This command deletes an administrative scope multicast boundary specified by
<groupipaddr>
<groupipaddr>
and <mask> for which this multicast administrative boundary is applicable.
<groupipaddr>
is a group IP address and <mask> is a group IP mask.
Format
Mode
ip multicast
This command sets the administrative mode of the IP multicast forwarder in the router to
active.
active.
Default
Format
Mode
no ip multicast
This command sets the administrative mode of the IP multicast forwarder in the router to
inactive.
inactive.
Format
no ip multicast
Mode
ip multicast ttl-threshold
This command is specific to IPv4. Use this command to apply the given Time-to-Live
threshold value <ttlthreshold> to a routing interface. The <ttlthreshold> is the TTL
threshold which is to be applied to the multicast Data packets which are to be forwarded from
the interface. This command sets the Time-to-Live threshold value such that any data
threshold value <ttlthreshold> to a routing interface. The <ttlthreshold> is the TTL
threshold which is to be applied to the multicast Data packets which are to be forwarded from
the interface. This command sets the Time-to-Live threshold value such that any data
ip mcast boundary <groupipaddr> <mask>
Interface Config
no ip mcast boundary <groupipaddr> <mask>
Interface Config
disabled
ip multicast
Global Config
Global Config