Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet
IP Multicast Commands
308
ProSafe Managed Switch
packets forwarded over the interface having TTL value below the configured value are
dropped. The value for <ttlthreshold> ranges from 0 to 255.
dropped. The value for <ttlthreshold> ranges from 0 to 255.
Default
Format
ip multicast ttl-threshold <ttlvalue>
Mode
no ip multicast ttl-threshold
This command applies the default <ttlthreshold> to a routing interface. The
<ttlthreshold>
<ttlthreshold>
is the TTL threshold which is to be applied to the multicast Data packets
which are to be forwarded from the interface.
Format
no ip multicast ttl-threshold
Mode
show ip mcast
This command displays the system-wide multicast information.
Format
show ip mcast
Modes
Admin Mode
Protocol State
Table Max Size
Protocol
Multicast
Forwarding
Cache Entry
Count
Forwarding
Cache Entry
Count
show ip mcast boundary
This command displays all the configured administrative scoped multicast boundaries.
Format
show ip mcast boundary {<unit/slot/port> | all}
Modes
1
Interface Config
Interface Config
• Privileged EXEC
• User EXEC
Term
Definition
The administrative status of multicast. Possible values are enabled or disabled.
The current state of the multicast protocol. Possible values are Operational or
Non-Operational.
Non-Operational.
The maximum number of entries allowed in the multicast table.
The multicast protocol running on the router. Possible values are PIM-DM, PIM-SM, or
DVMRP.
DVMRP.
The number of entries in the multicast forwarding cache.
• Privileged EXEC
• User EXEC