Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet
Management Commands
627
ProSafe Managed Switch
no tacacs-server host
Use the no tacacs-server host command to delete the specified hostname or IP
address. The <ip-address|hostname> parameter is the IP address of the TACACS+
server.
address. The <ip-address|hostname> parameter is the IP address of the TACACS+
server.
Format
no tacacs-server host
<ip-address|hostname>
Mode
tacacs-server key
Use the tacacs-server key command to set the authentication and encryption key for all
TACACS+ communications between the switch and the TACACS+ daemon. The
<key-string>
TACACS+ communications between the switch and the TACACS+ daemon. The
<key-string>
parameter has a range of 0 - 128 characters and specifies the
authentication and encryption key for all TACACS communications between the switch and
the TACACS+ server. This key must match the key used on the TACACS+ daemon.
the TACACS+ server. This key must match the key used on the TACACS+ daemon.
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the show running config command’s display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the show running config command’s display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
Format
tacacs-server key
[<key-string> | encrypted <key-string>]
Mode
no tacacs-server key
Use the no tacacs-server key command to disable the authentication and encryption
key for all TACACS+ communications between the switch and the TACACS+ daemon. The
<key-string>
key for all TACACS+ communications between the switch and the TACACS+ daemon. The
<key-string>
parameter has a range of 0 - 128 characters This key must match the key
used on the TACACS+ daemon.
Format
no tacacs-server key
<key-string>
Mode
tacacs-server timeout
Use the tacacs-server timeout command to set the timeout value for communication
with the TACACS+ servers. The <timeout> parameter has a range of 1-30 and is the
timeout value in seconds.
with the TACACS+ servers. The <timeout> parameter has a range of 1-30 and is the
timeout value in seconds.
Default
Format
tacacs-server timeout <timeout>
Mode
Global Config
Global Config
Global Config
5
Global Config