Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet
Management Commands
628
ProSafe Managed Switch
no tacacs-server timeout
Use the no tacacs-server timeout command to restore the default timeout value for all
TACACS servers.
TACACS servers.
Format
no tacacs-server timeout
Mode
key
Use the key command in TACACS Configuration mode to specify the authentication and
encryption key for all TACACS communications between the device and the TACACS server.
This key must match the key used on the TACACS daemon. The <key-string> parameter
specifies the key name. For an empty string use “ ”. (Range: 0 - 128 characters).
encryption key for all TACACS communications between the device and the TACACS server.
This key must match the key used on the TACACS daemon. The <key-string> parameter
specifies the key name. For an empty string use “ ”. (Range: 0 - 128 characters).
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the show running config command’s display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the show running config command’s display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
Format
key
[<key-string> | encrypted <key-string>]
Mode
port
Use the port command in TACACS Configuration mode to specify a server port number.
The server <port-number> range is 0 - 65535.
The server <port-number> range is 0 - 65535.
Default
Format
port
<port-number>
Mode
priority
Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The <priority> parameter
specifies the priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
servers are used, where 0 (zero) is the highest priority. The <priority> parameter
specifies the priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
Default
Format
priority
<priority>
Mode
Global Config
TACACS Config
49
TACACS Config
0
TACACS Config