Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Software Guide
Getting Started
19
7000 Series Managed Switch
Note:
If SNMPv3 authentication is to be used for this user, the password
must be eight or more alphanumeric characters.
5.
6.
To enable authentication, in the Authentication Protocol field select either MD5 or SHA for
the authentication protocol.
the authentication protocol.
7.
If you do not need encryption, go to Step 9.
8.
To enable encryption select DES for the encryption scheme in the Encryption Protocol
field. Then, in the Encryption Key field, enter an encryption code of eight or more
alphanumeric characters.
field. Then, in the Encryption Key field, enter an encryption code of eight or more
alphanumeric characters.
9.
Click Apply.